BlinkingLed: Erste getaktete Schaltung
In diesem Schritt lassen wir die LED zyklisch blinken
VHDL blinking_led.vhd
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
entity blink_led is
Port (
clk : in STD_LOGIC;
led : out STD_LOGIC
);
end blink_led;
architecture Behavioral of blink_led is
-- 27 MHz Oszillator
-- Bit 23 toggelt alle ~310 ms --> LED ca. 250..310 ms on/off
signal counter : STD_LOGIC_VECTOR(23 downto 0) := (others => '0');
begin
process(clk)
begin
if rising_edge(clk) then
counter <= counter + 1;
end if;
end process;
-- Bit 23 (MSB) als Ausgabe: toggelt alle 2^23 Takte = ~310 ms bei 27 MHz
led <= counter(23);
end Behavioral;
Zeile 1
Hier geht es zur ausführlichen Erklärung.
Weiter zu BlinkingLed
